CNC automatic lathe, motorcycle center rod special purposed machine
- Raw material 250mm-550mm
- Both sides each side have each tooling
- Working range: X axis stroke=100mm or more, Z axis stroke=250mm or more.
- Spindle system: belt drive, max spindle speed 3000 rpm
- Feed system: linear rail side
- Controller: Mitsubishi
- Cooling water spray system
- Safety shield
- Oil-water separator
- Scrap box
- 3 light colors, emergency stop switch
The following are the specifications of CNC special lathes (according to customer needs to design machine)
| Content | Unit | LT-40600-21 |
| Stroke | ||
| X1 axis stroke | mm | 160 + 20 |
| Z1 axis stroke | mm | 120 |
| X2 axis stroke | mm | 160 + 20 |
| Z2 axis stroke | mm | 400 |
| Machining area | ||
| Max. machining diameter | mm | 250 |
| Max. machining length | mm | 550 |
| Spindle | ||
| Spindle motor | kw | 7.5 |
| Spindle speed | rpm | 1,600 |
| Chuck type | mm | Thimble |
| Turret | ||
| Turret type | type | Nil |
| Cutter quantity | 1+1 | |
| Handle bar size | mm | □25 |
| Change tool fast spped | sec. | Nil |
| Tailstock | ||
| OD of mandrel | mm | Ø55 |
| Mandrel stroke | mm | 70 |
| Tailstock stroke | mm | 230 |
| Mode taper | type | MT-#4 |
| Feed speed | ||
| Fast feed speed (X/Z) | m/min | 24 / 24 |
| Other specs | ||
| Floor area (widthxdepth） | mm | 2,600 × 2,100 |
| Machine weight | kg | 4,500 |
| Max machine height | mm | 2,200 |
| Voltage capacity | KVA | 20 |
| Mitsubishi M80 dual system | Spindle thimble |
| Manual hydraulic tailstock | Water tank and cooling pump |
| Hand wheel (MPG) | Hydraulic device |
| Oil-water separator | Scrap box |
| Fluorescent lamp | Heat exchanger |
| Cutting water spray | Three-color signal light |
| Auto door | Standard 1+1 tool holder (including tool) |
| Base flush | Tooling box |
| Socket chuck | Programmable tailstock |
| Conveyor | Electric box coolant device |
| Oil mist collect device | Turret |
| Transformer | Automatic feeder and interface |
